If you like growing herbs indoors and you're hurting for space go vertical with a modular plant stand. With a garden-stake,  zip-ties,  jiffy-pots, and these STL files you can build this modular plant stand. There are 3 parts in each module: the mounting bracket, the jiffy-pot holder, and a pin to connect them. No support material is required to print.  A single module prints in under 3 hours on my CR-10. Just connect the bracket to the holder with the pin, zip-tie the module to a secured garden-stake, pop in a jiffy-pot or equivalent and you're good.  If the pin doesn't easily pop into the holes just gently squeeze the pin's ends with a pair of pliers and try again. Once assembled the holder swivels so you can angle plants for sun and to pack in more pots on the stand.