Here is the 3D model of baby Yoda from The Mandalorian series in a pen holder version.

It is made up of several parts so that it can be printed more easily and in several colours and/or materials. The base is hollowed out and can be closed with a lid so that you can put whatever you want in it (can be weighed down if you put in rice or small coins for example). Can be used as a pen holder (Pos1) but also as a paperweight (Pos2) it will be a nice decorative object and a nice gift.

PLA (Creality CR-10s) :

For nozzle diameter 0.40 mm Extrusion multiplier: 0.95 Extrusion width: 0.40 mm Retraction distance: 5 mm Additional restart distance: - 0.20 mm Vertical retraction elevator: 0.25 mm Retraction speed: 20 mm/s Disengagement distance: 0.20 mm Main layer height: 0.18 mm Upper solid layers: 4 Solid layers inferior : 4 Contour shells: 3 Filling percentage: 8%. Overlap of the contour: 20%. Supports percentage fill: 20%. Substrate base layers: 2 Media type: normal Supporting abutment resolution: 4 mm Maximum overhang angle: 45° (can be increased to 60°) Extruder temperature: 205°C (variable according to the type of PLA) Heated bed (optional): 50°C Printing speed: 50 mm/s Under contour speed: 50%. Under solid filling speed: 80%. Under speed of the support structure: 80%.

Resin: Plant-based UV Resin Layer thickness: 50 µ Exposure/coating time: 10 sec.