𝙄𝙩'𝙨 𝙣𝙤𝙩 𝙖 𝙨𝙞𝙢𝙥𝙡𝙚 𝙥𝙪𝙢𝙥𝙠𝙞𝙣 𝙖𝙣𝙙 𝙞𝙩'𝙨 𝙣𝙤𝙩 𝙖 𝙨𝙞𝙢𝙥𝙡𝙚 𝙨𝙠𝙪𝙡𝙡... 𝙞𝙩'𝙨 𝙩𝙝𝙚 𝙤𝙣𝙚 𝙖𝙣𝙙 𝙤𝙣𝙡𝙮 𝙋𝙪𝙢𝙥𝙠𝙞𝙣 𝙎𝙠𝙪𝙡𝙡!
What's better than printing this amazing spooky Pumpkin Skull to get ready and enjoy Halloween to the fullest? 🎃💀
Don't be scared and grab yours! 🎃💀
(3 𝙎𝙏𝙇𝙨 𝙞𝙣𝙘𝙡𝙪𝙙𝙚𝙙 : 𝙁𝙪𝙡𝙡 𝙫𝙚𝙧𝙨𝙞𝙤𝙣, 𝙋𝙪𝙢𝙥𝙠𝙞𝙣, 𝙎𝙩𝙚𝙢)
⸻⸻⸻⸻⸻⸻⸻⸻
𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :
🔸 3D Printer: Geeetech A10 🔸 Nozzle: 0.4 mm 🔸 Slicer: Cura 4.2.1 🔸 Layer height: 0.2 mm (0.8 mm wall thickness; 8 top/ 3 bottom layers) 🔸 Print time: 8h38min 🔸 Infill : 10% 🔸 Support needed 🔸 Printing Temperature: 200°C / Build Plate Temperature: 60°C 🔸 Print speed: 50 mm/sec / Outer Wall Speed: 25mm 🔸 Filament: Orange PLA by Eryone 🔸 Size: 68.5 x 82.8 x 74.6 mm ( X, Y, Z)
Loading prints...
Pumpkin Skull
Creative Commons Attribution-NonCommercial-NoDerivatives
You can download and share as long as you credit the creator, but you cannot change the material or use it for commercial purposes.
Licensed under CC BY-NC-ND
Loading comments...