This screen housing designed for BTT TFT35 V3.
BTT_TFT35_V3_CASE_V1.stl and BTT_TFT35_V3_CASE_V2.stl designed with the same mounting dimensions as in BTT TFT35 V2. It means that you can attach it to any 3D printer with a flat front panel and with the same mounting dimensions as in BTT TFT35 V3.
BTT_TFT35_V3CASE_FOR_ZAV (lerdge screen ).stl designed for ZAV printers and has lerdge screen mounting dimensions.
Attention: the screws ISO 7380 M3x6 have to be no longer than six millimeters in length, they are used only for additional fastening of the encoder plate and for a good appearance.
For this project, I used the model from the website GrabCAD. Here it is BIGTREETECH TFT35 V3.0 Touch Screen
The installation needs:
4 screws ISO 7380 M3 16 mm
2 screws ISO 7380 M3 6 mm
4 screws DIN912 M3 length of the screws depends on your printer
4 x M3 hex nuts
If you found this useful, please donate what you think it is worth to my paypal.me/ubivashka20 Help cover the time of design. Thanks, Enjoy!
Loading prints...
Screen housing for BTT TFT35 V3
Creative Commons Attribution-NonCommercial-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, with attribution and under the same license.
Licensed under CC BY-NC-SA
Loading comments...