Blackmagic Pocket 6 Pro Cage - BMPCC RONIN RS2

Designed this cage as I need a solution until smallrig and other company's have released there cages. This Cage features a few unique features:

- Inbuilt SSD Holder for Samsung T5

- Offset SSD mount to shift the weight towards the right of the camera so it will balance on the RONIN RS2 with no additional weights.

- Cable Holder to securely hold usb C both on cage end plus addition SSD shoe.

- Hot shoe mount for microphones ect.

- Protection against external damage.

- Interchangeable handle (NOT YET TESTED)

The most important aspects to this design is it allows you to use a SSD secured to you camera cage but at the same time utilizes the weight of the SSD to counter balance the RONIN RS2 meaning no additional weights are required. It allows you to quickly and easily remove the camera and cage from a the RONIN and still have the SSD connect and ready to go!

I've printed the cage both in PLA+ and PETG and both have turned out great. You will need to turn on supports for Both the TOP, SIDE and BOTTOM cages pieces. Cage pieces are held together buy 6 x 20mm M3 screws and I also used super glue or epoxy to hold the two surfaces together.

The bottom of the cage is bolted to the camera with a 20mm 1\4 screw or bolt and the top cage mounts with a standard 1/4 bolt.

Print settings:

- Supports On - Print speed 40% - Infill 80% -100%

Obviously this cage will not protect your camera as well as what a metal cage would so please use common sense when dropping cameras. I have also included the  top Handle which i have not tested yet so please use this at our own discretion The top handle is designed to be bolted on with 20mm 1/4 bolt and printed at 100%