I've always wanted to print this model but wasn't satisfied with just PLA or ABS. I recently made a 0.6 nozzle and was playing with talman's t-glase and knew this is what I wanted to print. The black is done with 0.4mm nozzle and 0.3 layer while the red is 0.6mm nozzle and 0.4 layer. The print is a composite of two gcode files for each nozzle that I combined around a common layer, like 100 for 0.2mm layer. So the base is 20% infill and the dragon body above the pillar is 0% infill and only one shell.