NightBook Holder with LED and Servo - 3D Printed by VitusP
599
Printer Used
My Rating
My Thoughts
Some parts such as the upper holder need to be oriented properly in order to as little support as possible. Overall, the printing is very breeze, just be patient! I use 4cmx6cm PCB to hold place the electronics.
Settings
Print Time
48
hr(s)
Material Brand
Hatchbox
Material Type
PLA
Layer Height
0.6
mm
Print Speed
48.0
mm/s
Extrusion Temperature
210.0
°C
Infill %
18.0
%
Supports
Yes
Comments